Quick Swap Nozzle Design

The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend.

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.

0.2mm Nozzle – Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle – Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

Comparison of Different Nozzle Sizes

*The final display of ‘Model Strength’ & ‘Model Fineness’ depend on the results of the material testing.

Filament Compatibility

[*Note]

* Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.

* Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

* For general carbon fiber or glass fiber filaments such as Bambu PAHT-CF and PET-CF, it is recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.

Learn more about filament compatibility on Bambu Lab Wiki.

Learn more about replacing the hotend with nozzle on Bambu Lab Wiki.

In the Box

– Hotend with Nozzle

Compatibility

A1 Series

Product Specifications