Specifications

• Range Of Product: Modicon STB distributed I/O solution
• Analogue Output Type: current 0…20 mA
• Product Or Component Type: standard analog output kit
• Analogue Output Number: 2
• Analogue Output Resolution: 12 bits
• Kit Composition: STBXTS1100, 6-terminal screw type connector || STBACO1210 module || STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector

Contractual warranty

• Warranty: 18 months

Complementary

• Insulation Between Channels And Logic Bus: 1500 V for 1 minute
• Cold Swapping: yes
• Height: 13.9 mm
• Status Led: 1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
• Hot Swapping Fallback: yes for standard NIMs
• Differential Linearity: monotonic
• Integral Linearity: +/- 0.1 %FS
• Supply: power distribution module
• Analogue Output Current: 0.02-0.02 A
• Data Format: EN 61131-2 || IEC 61131-2
• Current Consumption: 40 mA 5 V DC logic bus
• Marking: CE
• Net Weight: 0.117 kg
• Fallback Status: state 0 basic NIMs || user configurable standard NIMs
• Temperature Drift: +/-0.01 %/C
• Insulation Between Channels And Actuator Bus: 30 V
• Absolute Accuracy Error: +/- 0.5 % of full scale per C
• Addressing Requirement: 2 output words || 1 word for configuring fallback status
• Response Time: 3 ms
• Protection Type: short-circuit protection
• Update Time: 25 ms
• Width: 128.3 mm
• Overvoltage Category: II
• Depth: 70 mm
• Product Compatibility: mounting base STBXBA1000 || power distribution module STBPDT3100/3105
• Conversion Time: 900 ms at +/- 0.1 % of final value
• [Us] Rated Supply Voltage: 24 V DC

Offer Sustainability

• Rohs Exemption Information: Yes
• Mercury Free: Yes
• Environmental Disclosure: ENVPEP1511012EN
• Sustainable Offer Status: Green Premium product
• Reach Regulation: Reference contains Substances of Very High Concern above the threshold
• California Proposition 65: WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation: X
• Circularity Profile: ENVEOLI1511012EN
• Eu Rohs Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Environment

• Product Certifications: FM Class 1 Division 2 || UL || CSA
• Ambient Air Temperature For Storage: -40…185 F without
• Ambient Air Temperature For Operation: 0-60 C without)
• Shock Resistance: 30 gn 11 ms IEC 88 reference 2-27
• Vibration Resistance: 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
• Ip Degree Of Protection: IP20 conforming to EN 61131-2 class 1
• Pollution Degree: 2 IEC 60664-1
• Ambient Air Temperature For Storage: -40-85 C without
• Relative Humidity: 95-95 % 60-60 C without condensation
• Operating Altitude: <= 6561.68 ft (2000 m)
• Ambient Air Temperature For Operation: 32…140 F without

Downloads

Spec Sheet

CAD

Module on base 13,9 mm – STB-IO4_CAD2D_all (dxf)
Module on base 13,9 mm – STB-IO4_CAD2D_all.wmf
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-right (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-top (dwg)
Module on base 13,9 mm – STB-IO4_CAD2D_all.dwf
Module on base 13,9 mm – STB-IO4_CAD2D_all (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-left (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-isometric (dxf)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-isometric (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-top (dxf)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-front (dxf)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-left (dxf)
Module on base 13,9 mm – STB-IO4_CAD2D_all (pdf)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-bottom (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-right (dxf)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-bottom (dxf)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-back (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_3D-simplified (stp)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-front (dwg)
Module on base 13,9 mm – 3D CAD – MCADID0005033_2D-back (dxf)

Declaration of conformity

DCC_STB_JUL2016 – DCC_STB_JUL2016 (pdf)
ACMA_RCM_STB_FEB2015 – ACMA_RCM_STB_FEB2015 (pdf)
Modicon STB, Declaration of Conformity, UKCA, Schneider Electric – UK_DoC_STB_May2022.docx (pdf)

Certificate

Modicon, Certificate, UL, Ordinary Location – UL_E486184_NRAQ7_ALL_Jan2023 (pdf)
Modicon, Certificate, UL, Ordinary Location – UL_E486184_NRAQ_ALL_Jan2023 (pdf)
Modicon STB, Certificate, IACS, ABS, Marine – Certificate+No.23-2343675-PDA+signed (pdf)
Modicon STB, Certificate, IACS, DNV-GL, Marine – DNV-GL_TAA0000064_STB_JAN21 (pdf)
Modicon STB, Certificate, cCSAus, Hazardous Location – HazLoc_cCSAus_225844_700136731_STB_NOV2017 (pdf)
EAC_RUCFRME83B00132_STB – EAC_RUCFRME83B00132_STB_JUL2014 (pdf)
Modicon STB, Certificate, CSA, Ordinary Location – CSA_225844_2591645_STB_AUG2017 (pdf)

Catalog

Catalogue: IP 20 distributedinputs/outputsModicon STB (LR PDF) – MKTED2130401EN+(web) (pdf)

Circularity Profile

Modicon STB IP20 distrbuted inputs/outputs and power modules, Product End-of-Life Instructions – ENVEOLI1511012EN_V1 (pdf)

Environmental Disclosure

Modicon STB IP20 distrbuted inputs/outputs and power modules, Product Environmental Profile – ENVPEP1511012EN_V1 (pdf)